RIGID REAR PROJECTION SCREENS

Material: Rigid rear projection screens are constructed of a single piece acrylic sheet in 3mm, that is durable, light weight (3,6 kg/m2) and scratch-impact resistant.

Surface: No fragile lens structures on the surface. No laminates and no optical coatings. All optical properties are imbedded inside the screen surfaces. Screens are fully submergible and washable. Surfaces are non-glare and anti-reflective for use in daylight. Screens are resistant against scratches and contamination. No need to use special cleaning agents. Low maintenance and extremely user friendly.

Optical Performance: Brightness gain is 4.0 with 180 degree viewing angles in horizontal and vertical. Half gain angle is 40 degrees. Uniform images across the screen surface without any hot spots. Screen resolution is infinite, limited only by the projector and source technical values. Pure and extraordinary imagery even under high ambient light conditions. Ultraviolet protection for viewers.

Installation: Lightweight material enables screens to be easily mounted in every point you can imagine. Screens can be freely hung with steel wires for stylish floating images. Screens allow utilization of existing ceilings, windows, walls or open spaces for low cost installations. Our screens accept on or off axis projection with excellent uniformity. Screens can be freely suspended in mid air to achieve full motion "floating" images that will instantly attract interests. Screens can also be curved and shaped for unusual attractive presentations.

* All RPS Products are manufactured under ISO 9001 certificated facilities.

IMAGE GALLERY